All posts by neonview68
20 Myths About Car Key Cover Fiat 500: Debunked
Fiat 500 Key Fob Replacement
If your 500 keyfob stops functioning, try another to see if it is able to be detected by your car. If it does, then the issue is likely with the battery or water damage on the fob that was originally used.
First replace the battery. The "+" side should be facing down.
Dead Battery
The battery is usually the reason behind a fob not working. It's easy to fix and most fobs will provide a warning signal if the battery is not fully charged. You can find instructions on YouTube for nearly any key fob in your car or in the owner's manual. You can also take it to a local locksmith or the dealer that gave it to you to replace it.
Sometimes, a fob will cease to function, and it could be a problem with the circuit board in the internal circuit. It's not common however it can happen. The internal chip can be damaged if you drop the fob on something that is hard. This could also happen if you use an aftermarket key and the fob won't work. In this scenario you'll have to visit an expert locksmith or dealer and have it reprogrammed to work with your 500.
One 2012 FIAT 500 Flip Key Remote - resembles Ilco brand with trunk, lock and lock buttons. This is a new keyless entry remote (will need to be cut & programmed by a locksmith)
Chip Damaged
A key fob with the fiat 500 number is a wireless device that provides the signal for the car to start when you press the button. It is equipped with a microchip that contains the information that is needed to communicate with the car. If the chip is damaged, it can't transmit the correct code, and the car will not start. It's possible to repair this kind of damage and a locksmith will help. United Locksmith is capable of completing this service for classic models as well as newer ones, so don't feel uneasy about calling them.
You can purchase a new fob and have it programmed professionally by a locksmith. This is less expensive than visiting a dealer and it works just as well. You will need to provide certain information to the locksmith, like the year your vehicle was manufactured and its model.
If you're not sure of the best solution to this problem Try rubbing the chip with a US dollar bill. The copper in the bill is abrasive enough take away oxidation and dirt but won't cause any harm to the microchip. The chip may not be repairable when it's physically damaged. This can happen if you fall it, ram it over by your vehicle or any other type of physical strain.
Water Damage
Water damage is likely to happen on your device, whether you dropped them in the pool accidentally, left them in the pocket while swimming, or splashed them with water during a rainy afternoon. Even if it only has a little water on the key, this can cause serious issues with its electronics and stop it from functioning effectively.
The good news is that you can often solve this problem by removing the fob's key and then using the paper towel to cleanse it of any dirt or water that remains. Once the fob is dry it is possible to replace its battery. It will then begin working properly.
You can also take it to an auto repair shop or locksmith to have it professionally programmed and cleaned. These experts will be able to utilize special equipment to ensure that the key fob is compatible with your car's computer system.
If your Fiat 500's key fob ceases to work, it could be a stressful and frustrating. You may be tempted to head to the dealer to have your key fob replaced but this could be expensive and unaffordable. Locksmiths can take care of every aspect of your car's key fob replacement without the necessity of a dealership visit. Locksmiths are more reliable over a dealer as they can take care of all aspects of the replacement of your car's key fob without the need for a dealership visit.
Pairing Issues
If you accidentally drop your keyfob or it ceases to function and nothing else seems to be wrong, it could be the chip. G28 Car Keys could be due water damage, a dead battery or it may just need reprogramming.
Often, this can be done by following the directions in the owner's manual. However it's a good idea to have an automotive locksmith do this if you're having issues or the instructions in the manual don't work for you. This will ensure that the chip is not damaged, and is the most economical alternative.
Some 500 owners have also reported that their key fobs won't lock their cars. This can be a huge issue if you're at a gas station and want to refill. Some owners have complained that their 500's locking system been damaged and they have needed to replace the entire intermediate steering shaft. This issue has been reported in a technical service bulletin (TSB) by Fiat.
If you're having problems with your Fiat, an experienced locksmith could help. They're able to duplicate your existing key or make you new keys that lock and start the car. They can do this without having access to your old key, and it's usually cheaper than buying a new one from the dealer.