All posts by orderdate5
One Key Trick Everybody Should Know The One Ghost 2 Immobiliser Reviews Trick Every Person Should Be Able To
Ghost 2 Immobiliser
Ghost is a wireless security system that safeguards your car from key-cloning and hacking. It connects to the ECU unit via the CAN data networks and is silent, which means it can't be detected.
It can only be disarmed by pressing a specific button sequence (like PIN code) that you've programmed with the buttons of your car - such as those on the steering wheel or centre console.
Make sure you're protected from theft
Car theft is on the rise, and cars are stolen in a matter of seconds. It is important that car owners take into consideration the additional security measures they can employ. Immobilisers are among the most effective and proven methods to keep your car safe. Ghost immobilisers are a great alternative because they are small, hidden inside the wires of your vehicle, and do not emit any radio frequency signals. They are therefore untraceable and can be put in without having an impact on the CAN bus system of your vehicle.
In contrast to other immobilisers that depend on keypad input, tags or the exact sequence of buttons to disarm them, our ghost immobiliser near me can only be deactivated with the exact pin code set up by us at the time of installation. This unique disarm sequence uses the buttons that are already in your vehicle such as the ones on the steering wheel, doors or centre console to prevent anyone from starting and driving away your vehicle. This prevents thieves from copying your key or using a jamming/spoofing device that can disable standard car immobilisers.
Ghost immobilisers will not only stop your car from being driven but it also prevents it from being dismantled for parts. This is a rising issue in the UK because of the increasing popularity of these kinds of vehicles. It can happen within an hour. TTW's ghost immobilisers can be easily programmed to guard your vehicle from these kinds of attacks.
If you have our ghost 2 immobiliser in my area it will prevent your vehicle from being stolen at an auto repair shop or if it is being driven by an employee whilst your car is on the lift at the garage. The Ghost can be set to Service/Valet Mode, which only allows you, the customer to select a unique button combination.
If you'd like to find out more about our ghost immobilisers, or would like to receive a no-cost estimate, call us today. We are happy to assist you and give you peace of mind knowing that your vehicle is protected at all time.
No Key Fobs, LED Indications, or Key Fobs to identify its location.
Secure your vehicle from the newest type of car theft with this non-detectable immobiliser that integrates into your vehicle's CAN data network. Unlike other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it makes use of buttons found in the standard factory controls that are already in your vehicle such as the ones on the steering wheel, door panels and the centre console. This means that a hidden pin code is created which must be entered before your vehicle starts, making it completely undetectable to thieves.
The developers of the CAN-BUS immobiliser have also added extra high-security methods to protect the device from being breached or hacked. It also offers the ability to block CANBUS and physically immobiliser cuts. This means that even the keys are stolen, the thief won't be able to escape with your joy and pride.
It's easy to install the CAN BUS immobiliser in your vehicle and it only takes around 30 minutes. We will have one of our staff in your area to schedule the time and place that is convenient for your needs. After your vehicle has been fitted, you will be given an registration number and unique security codes for your phone and the app to make it easy to use and ensure that you are always in control of your car's security.
The system is compatible with most modern cars, but should you own a vintage or specialist car we recommend you contact us to check compatibility. The Ghost Immobiliser 2, with installation included is priced at APS449 The car will be added to the International Security Register if installed by one of our approved installers. If you have any questions do not hesitate to get in touch with our helpful staff. We look forward hearing from you.
Easy to Setup and Program
Modern vehicles are often equipped with immobilisers to stop thieves from stealing or hot-wiring your vehicle. In contrast to physical deterrents like steering wheel locks or wheel clamps, an immobiliser is concealed within your vehicle making it virtually impossible to find and defeat.
The system connects directly to the CAN data network of your vehicle and stops the vehicle from starting until you enter a unique, personalised code. The unit is sealed, and so small that it can be positioned practically anywhere in your car with no need for wiring. It doesn't also emit radio frequency signals, so it cannot be detected by RF scanning or code grabbing equipment used by thieves.
Ghost uses the buttons on your steering wheel, door panels and centre console of your car to create an individual (like pin code) disarm sequence that has to be entered in order to start your car. The pin code sequence can be altered depending on the need and is based on between four and twenty button presses. You can even put the vehicle in Service/Valet Mode to ensure that it is still operable but it will not start or drive. This will ensure that your car is secure when you bring it to the mechanic for valet parking or service and also that the mechanic can't access your pin code to disable your system.
If you will be away from your vehicle for a prolonged period for example, on a vacation or business trip You can use our app for a temporary pin. You can also enter your pin code manually when you want to drive the vehicle.
Our CAN bus immobiliser can be linked to remote key fobs and tracker (Brand dependent) which will take priority over the ghost system. This will provide extra security if your vehicle is stolen or if your keys get lost.
If you're looking for a way to safeguard your vehicle from key-cloning and hacking contact us today to see how we can assist. We offer our services throughout the UK and in our own installation centre in Derby.
Service/Valet Mode
Modern vehicles come with sophisticated stop/start eco systems that require just the proper inputs to function correctly eg battery voltage, engine temperature, external temperatures and what electrical systems are in operation. They can cause issues and it can be difficult to determine if the issue is Ghost-related or not. This is particularly the case if your car was recently serviced or valet-parked. ghost immobiliser installers near me can utilize the ghost service mode that allows the vehicle to begin and drive temporarily without the need for a pin code. This is useful when your car's being serviced by an independent garage or valet-parked.
Press the service button five times to enter service mode. The indicator signal will flash twice when the service mode is selected. You can exit this mode at any point by entering a PIN number. After you exited the service mode, the Ghost immobiliser will resume normal operation.
It is a discrete system that communicates with the vehicle ECU via the CAN data circuit. It is directly connected to the original buttons of the vehicle and does not use radio frequency signals, as do other immobilisers. This makes it virtually impossible for any other device or hacker to bypass the system. Even devices that disguise codes from the original key fob won't affect this.
It is a TASSA certified anti-theft device that meets the highest standards of protection. It also has a unique vehicle marking system linking to the international security register which is a requirement for insurance companies.
The ghost immobiliser is a tiny device that can be easily hidden within the wiring of your vehicle's factory. This makes it virtually impossible for thieves to steal. The sealed unit is so small that it can be mounted in many areas of the vehicle, including under dashboards or on steering wheels.
The system makes use of the existing buttons within your vehicle (such as those on your steering wheel or door panels, or on your central console) to allow you to make a unique and changeable disarm sequence up to 20 presses long that must be entered before your vehicle can start. Anyone who has your unique pin code is able to enter it - meaning you, your family, your colleagues or friends can use it.